Error: Cannot read Setup (.CAB) files (due to Multimedia Cloaking is running).
Error:
Cannot read Setup (.CAB) files.
Cause:
This error occurs when installing Windows 95 from floppy diskettes while Multimedia Cloaking is running. Windows 95 is stored as (*.CAB) files on the installation diskette. These are normal files which contain pieces of one or more files in compressed format.
Solution:
Exit Setup and remove the statement containing Cachelk.exe from Autoexec.bat or Config.sys.
1) Exit Setup.
2) Type the following at the prompt and press ENTER:
EDIT AUTOEXEC.BAT
3) Locate a statement referencing CACHECLK.EXE.
EXAMPLE: C:\NETROOM\XLOAD.EXE -SD001 -M31488 C: \MMCLK\CACHECLK.EXE /K=3072 /WK=3072 /H=2048 /WB=1
4) Type REM (followed by a space) preceding the statement.
5) Select the 'File' menu and select 'Save' to save the edited Autoexec.bat file.
6) Repeat steps 2) to 5) with Config.sys.
7) Reboot the computer and continue with Setup.
